![ZAH019 M2 Macbook 顯示器](https://za3c.com.tw/wp-content/uploads/2022/10/ZAH019-01-1024x672.jpg)
Macbook M2 版本 如何使用 ZAH019 安裝連接 顯示器
ZAH019 八合一 USB Type-C Hub 集線器 功能介面介紹
- 即插即用 無需驅動
- 4K高畫質、清晰轉接
- 1個 SD卡槽、1個 TF卡槽
- 1個 HDMI 4K UHD投影輸出
- 1個 USB Type-C高速傳輸孔位
- 2個 USB Type-A高速傳輸孔位
- 1個 RJ45網路孔位支援100Mbps高速網路
- 1個 USB Type-C孔位提供最高87W PD快充
Macbook Air M2 使用 ZAH019 安裝連接顯示器
需準備
- 喆安 ZAH019 八合一 USB Type-C Hub 集線器
- 顯示器 *1台
- 公對公延長線 *1條
- Macbook M2
安裝無須下載任何驅動程式,連接後即可鏡像投影
1. 將 ZAH019 Type-C頭 插入 Macbook M2 Type-C插孔
![ZAH019 M2 Macbook 顯示器](https://za3c.com.tw/wp-content/uploads/2022/10/ZAH019-03-1024x672.jpg)
2. 準備 1 條HDMI公對公線 並插入顯示器 HDMI 插孔
![ZAH019 M2 Macbook 顯示器](https://za3c.com.tw/wp-content/uploads/2022/09/06-1024x672.jpg)
3. 再將HDMI公對公線另外一頭插入ZAH019 HDMI 插孔,就即可單螢幕投影顯示
![ZAH019 M2 Macbook 顯示器](https://za3c.com.tw/wp-content/uploads/2022/10/ZAH019-02-1024x672.jpg)
畫面延伸步驟
1.首先點擊桌面左上角蘋果icon -> 系統偏好設定 -> 選顯示器
![](https://za3c.com.tw/wp-content/uploads/2022/08/M2實測圖片-拷貝-1024x672.png)
2.選擇 「顯示器設定」
![](https://za3c.com.tw/wp-content/uploads/2022/08/M2-ZAP440-3-1-1024x672.png)
3.左側選擇要延伸的顯示器型號 -> 改為 「延伸的顯示器」就完成囉!
![](https://za3c.com.tw/wp-content/uploads/2022/08/M2-ZAP440-4-1024x672.png)
![](https://za3c.com.tw/wp-content/uploads/2022/10/ZAH019-04-1024x672.jpg)
閱讀相關文章: ZAP440 使用說明書 – Macbook M2 如何 連接顯示器?
閱讀相關文章: ZAP470 使用說明書 – Macbook M2 如何連接 顯示器 ?
推薦文章
相關產品
SET THE PRIMARY AND SECONDARY MONITOR
- Right-click on your desktop and select “Display”. At the top of the resulting dialogue box, your available monitors appear as blue, numbered boxes. Each box represents a monitor (e.g. box “1” corresponds with the left monitor and box “2” corresponds with the right monitor).
- From the display, select the monitor you wish to be your main display.
- Check the box that says “Make this my main display.” The other monitor will automatically become the secondary display.
- When finished, click [Apply].
SET THE MONITOR RESOLUTION
- Right-click on your desktop and select “Display”. At the top of the resulting dialogue box, your available monitors appear as blue, numbered boxes. Each box represents a monitor (e.g. box “1” corresponds with the left monitor and box “2” corresponds with the right monitor).
- From the display, select the monitor you wish to adjust.
- Click the “Advanced display settings” link (located at the bottom of the dialogue box).
- Click the “Resolution” drop-down menu and select your desired resolution.
- When finished, click [Apply].